Picture Name

All
  • All
  • Product Management
  • News
  • Introduction
  • Enterprise outlets
  • FAQ
  • Enterprise Video
  • Enterprise Atlas
Picture Name
+

Microcomputer Integrated Relay Protection-5U Series

HZD300PX501 series protection measurement and control device by line protection, transformer protection, capacitor protection, reactor protection, standby power supply, motor protection, etc., can be used for 110kV and the following voltage level of various industrial and mining enterprises and power industry. Through the use of high-performance 32-bit CPU, the protection, measurement and control, communication functions are integrated into one, which is suitable for substation integrated automatic system or new energy power plant electrical automation system. The device can be installed in a group of screens, and can also be directly installed on the switch cabinet for decentralized control.
Message

Product Parameters

Performance characteristics

1. Using the international popular high-speed processor, the main frequency is 200 MHz, the built-in resources are rich, the peripheral circuit design is simple, and the manufacturing quality and stability of the product are guaranteed. Sufficient hardware resources, 8M bytes of Flash Memory memory.

2. Measure three-phase current and zero-sequence current (Ia,Ib,Ic,Io), three-phase or line voltage (Uan,Ubn,Ucn,Uab,Ubc,Uca), active power P, reactive power Q, power factor cosφ, frequency f, active power kWh, reactive power kVarh.

3. The measured values of current, voltage, power and electric degree not only reflect the fundamental wave, but also correctly reflect the 2~13 harmonics, and the frequency is 45~60HZ adaptive, so that the measurement results are consistent with the special measuring meter.

4. It has a 4 ~ 20mA DC analog output (which can be customized as current, voltage or power) to replace the AC acquisition transmitter.

5. Self-contained operation circuit, which can adapt to 0.5A ~ 5A switch tripping current, and the operation circuit is common to AC and DC.

6.GPS timing can adopt network timing mode, and also support B code timing mode (RS485 interface) and SNTP mode.

7. Two 100M Ethernet communication interfaces, one RS485 communication interface, support IEC60870-5-103,Modbus and other protocols.

There are 8.16 fault records, and the sampling point record contains up to 13 analog quantities (interval is 1mS), and the record adopts standard Comtrade format.

9. The static power consumption of the whole machine is low (about 6W), and the liquid crystal module adopts new technology, which greatly improves the service life.

10. High anti-interference performance, through 10 electromagnetic compatibility testing certification, fast transient, electrostatic discharge, surge anti-interference performance has reached the highest level (level IV) standards.

11. Working environment temperature range:-25 ℃ ~ +55 ℃ (liquid crystal without fuzzy, slow phenomenon).

 

 

Technical parameters

 

Serial Number

Project

Parameters

1

Working temperature

-20 ℃ ~ 55 ℃

2

Storage temperature

-40 ℃ ~ 85 ℃

3

Relative humidity

No more than 95%, no condensation

4

Working power supply

AC/DC110V-220V，DC24V-48V

5

telemetry accuracy

Voltage: less than 0.5%, current: less than 0.5%, zero sequence current: less than 0.02A

6

Protection setting range

Current: 0~99.99A, the error is not more than 3% or 0.05A

7

Zero sequence current: 0 ~ 50A, the error is not more than ± 3% or 0.02A

8

Communication Interface

RS-485 interface; Ethernet communication interface

Message

* Note: Please fill in the information accurately and keep communication smooth. We will contact you as soon as possible.

Submission